2'x4' Motorized HEPA Ceiling Filter, U/L Listed, 115 V

Series 112 Motorized Ceiling HEPA Filter Module 2'x4'

The Series 112 is an FFU (Fan Filter Unit), or it is sometimes called a MCF (motorized ceiling filter). This module is a self-contained clean room filter unit that draws air in through a top-mounted prefilter. It then blows the air out the other side through a HEPA filter (ULPA filter is also available) into a controlled space. A typical application is installing it into a 2 ft. x 4 ft. ceiling grid system, however, units can also be mounted on a support frame or suspended from a support structure. These clean room filters are USP 797 compliant.

The galvanized steel blower housing screws to the top of an aluminum framed HEPA or ULPA filter. The internal direct drive blower/motor assembly is isolated from the exterior housing by torsion flex motor mounts and rubber vibration isolation mounts. Internal acoustical foam baffles reduce sound and enhance airflow uniformity.

Ceiling Clean Room HEPA Filter Features:

• Self-contained design
• Lightweight
• All-metal filter housing
• Easily installs into a 2 ft. x 4 ft. ceiling grid system
• Standard unit ships with a HEPA filter and prefilter
• Internal acoustical foam baffles for reduced sound
• UL listed
• Operates at low, medium, and high speeds

Ceiling Clean Room HEPA Filter Specs:

• 23.625”x 47.625” x 13.25” high
• Galvanized steel housing with exposed anodized aluminum filter frame
• 99.99% @ 0.3 micron HEPA filter with prefilter
• 3 position speed control
• U/L listed
• 115V, 60 Hz, 2.8 amps

For QUANTITY DISCOUNTS, Please Contact Innotech Products!